Garage Door Safety Inspection

A professional safety inspection is the best way to confirm it's operating correctly and to protect your family, pets, and property from preventable accidents.

*Most cable repairs completed in under 1 hour

Better Faster Reliable Garage Door Service & Repair

Beyond Maintenance: The Necessity of a Dedicated Safety Inspection

This section emphasizes the critical, life-saving checks that should be done regularly, regardless of when the last tune-up occurred.

  • Protect Your Family: The primary goal is ensuring the auto-reverse system (sensors and pressure) works perfectly to prevent serious injury.

  • Address High-Tension Risk: Springs and cables are under extreme load. A failure can happen suddenly. We proactively check for hairline fractures and metal fatigue.

  • Maintain Home Insurance Compliance: Documentation of an annual safety check demonstrates responsible homeownership, especially after storm damage or an accident.

  • Stop Door Collapse: We check the critical integrity of the bottom brackets, track anchors, and mounting bolts that prevent the heavy door from falling

Our Detailed Safety Inspection Checklist

We leave no stone unturned. Our comprehensive garage door safety inspection includes a detailed check of every critical component.

Core Safety Mechanisms:

  • Photo-Eye Sensor Test: We check alignment and test the sensors’ ability to detect an obstruction and reverse the door.
  • Auto-Reverse Test: We perform a physical obstruction test (e.g., with a block of wood) to ensure the door reverses on contact.
  • Force Setting Test: We verify the opener is not set to use excessive force to close, which can be a serious crushing hazard.
  • Door Balance Test: We disengage the opener and test if the door stays in place when lifted halfway. An imbalanced door puts dangerous strain on the opener.

Hardware & Structural Components:

  • Springs, Cables & Pulleys: A visual inspection for rust, fraying, or signs of fatigue.
  • Rollers, Hinges & Brackets: We check for cracks, wear, and loose parts.
  • Track Alignment & Fasteners: We ensure tracks are properly aligned, secured to the wall, and free of dents.
  • Panel & Section Integrity: We look for cracks, damage, or warping that could affect performance.
  • Weather Seals: We inspect the bottom rubber seal and perimeter stripping for proper contact and condition.

Opener & Accessories:

  • Emergency Release Handle: We test the function of the red emergency release cord.
  • Travel & Limit Settings: We confirm the door opens and closes to the correct positions.
  • Backup Battery & Wall Control: We test the function of the opener’s backup power and wall-mounted controls.
  • Remotes & Keypad: We ensure all remote-access devices are functioning correctly.

Our Focused 15-Point Critical Safety & Compliance Check

01

Scheduled Appointment

We schedule a convenient time for our technician to visit.

02

Systematic Inspection

Our technician works through the multi-point safety checklist, testing and examining every component.

03

Clear Communication

The technician will explain what they are checking and point out any areas of concern.

04

Written Safety Report

Upon completion, you will receive a detailed report outlining the inspection findings and the status of each component (Pass/Needs Attention/Fail).

05

Honest Recommendations

If any issues are found, we will provide a clear explanation and an upfront, no-pressure quote for any recommended repairs.

Upfront Pricing & Honest Assessments

Your family’s safety is our top priority. We offer our comprehensive safety inspection service for a clear, flat-rate fee. This service is designed to give you information and peace of mind. If any repairs are needed to bring your door up to safe operational standards, we will provide a detailed estimate for your approval before any work is done.

Our Service Guarantee & Proudly Serving Your Local Community

Trust in our thorough safety inspections to provide a complete and accurate assessment of your garage door’s condition. We empower you with the knowledge to make informed decisions and ensure your home and family remain safe.

For urgent repairs, our mobile technicians provide rapid broken spring service throughout Massachusetts, New Hampshire, Rhode Island, and Connecticut.

Because a faulty spring often impacts other components, we also offer comprehensive inspection and repair for:

Frequently Asked Questions About Garage Door Cables

Is a safety inspection the same as a tune-up

They are very similar, but the focus is different. A tune-up includes lubrication and minor adjustments as part of the service. A safety inspection’s primary goal is to test all safety systems and provide a detailed report of the door’s condition, with repair recommendations made separately.

You can do a quick test by waving an object (like a broom handle) through the sensor beam as the door is closing. The door should immediately stop and reverse. Our professional test is more comprehensive, but this is a good indicator.

Yes. Any garage door opener manufactured after 1993 is required by federal law to have photo-eye safety sensors. If your system lacks them, it is a major safety hazard and should be upgraded immediately.

A thorough inspection typically takes about 30-45 minutes to complete. This allows our technician to carefully test each component without rushing.

This is one of the most important safety checks. We disconnect the opener and lift the door by hand to about waist height. A properly balanced door should stay in place. If it falls hard or shoots up, the springs are not correctly tensioned and are a safety risk.

We offer a competitive flat-rate fee for our comprehensive safety inspection service. Please call us for a free, instant quote.

Don't Guess When It Comes to Safety. Get a Professional Inspection.

15% Off all garage door repair services

Get Started with a Free Quote Today.

*No obligation & 10 minute response. All work backed by a parts & labor warranty